Detects ferrous and nonferrous metals. Sensitivity is adjustable.

Current Consumption : Less than 3mA.
Weight : 230g. (Without battery).
Dimension : 395mm (operation), 260mm(storage).
Dia. of Search Head : f140mm.

Detection Distance :

One Rupee Coin : 7cm.
Iron pipe-tube of f20mm : 12cm.
Dagger : 11cm.

Metals are indicated by a continuously lit lamp and a continuous tone. Live electrical cables are indicated by the  light flashing and an intermittent Tone.

Detection depth at max.sensitivity

Live wires & cables : max. 100mm
Non-live wires and cables : max. 25mm,
Metal pipes : max. 40mm. Solid metal parts : max. 60mm.

• Uses a special sensor that pinpoints the edges of wood studs behind walls or ceilings.
• Calibrates instantly for immediate use.
• Bright LEDs and an audio signal indicate stud edges.
• Made to withstand daily jobsite use.
• Fashionable design for easy to use and hold.

Specifications

Accuracy : typically within 1/8 in. (3 mm) using the dual scan and mark procedure.
Depth : Up to 3 / 4 in. (19 mm) in Stud Scan mode.
Operating Temperature : 20° ~ 120°F (-7° ~ 49°C).
Storage Temperature : -20° ~ 150°F (-29° ~ 66°C).
Humidity : 80% RH (non condensing).
Water Resistance : Splash and water resistant, not waterproof.
Dimensions : 150*70*35mm.
Battery Type : 9 Volt. alkaline (not included).

Hand Held Metal, Voltage and Stud Detector

All same as above with Stud Detection

• Sealed by “0” rings
• 8 voltage settings : 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV,  275kV
• High bright LEDs visual indication Sound indication
• Easy-to-prove method
• Self-test selection
• Use 3 x 1.5V  “C” batteries
• High impact nylon casing
• Non-contact work by proximity Compatible with most link sticks Light weight, robust, and compact
• Suitable for indoor and outdoor use.

• 0.6” LCD Display.
• Data Output : RS232 Computer serial interface.
• Measurement & Range - Dissolved Oxygen : 0~20.0 mg/L, Temperature : 0~50oC. Resolution : 0.1 mg / L,
• Temperature : 0.1oC. Accuracy (23±5oC) : 0.4 mg/L,
• Temperature : 0.8oC / 1.5oF.
• Probe Temperature Compensation - Automatic 0~50oC.
• pH : 0~14pH.
• Resolution : 0.001pH, mV : 1mV.
• Accuracy : ±(0.02pH+2d), mV : ±(0.5%+2d).
• Temperature Compensation : Manual : 0~100oC, be adjusted by push button on front panel.
• Automatic (ATC) : with the optional Temperature probe (YK-200ATC) 0~65oC.

Mini Ultrasonic Distance Meter

• Measure distance at the speed of sound.
• Automatic Temperature compensation.
• Auto Self-recalibration.
• Range up to 50 feet (13.5m).
• Laser Targeting.
• Feet (inch) / Meter (Centimeter) one touch switch conversion.
• Auto Power-off.
• Battery : 12V 23Amp.
• Low battery indication.