Analyzers
Analyzers
Instruments :
Fuels : Natural Gas, LPG, Light Oil, Heavy Oil & User Defined
Pressure Ranges : mbar, kPa & in H2O. Data Storage : 10 sets of readings
Data Logging : 400 sets of readings on ‘Timed Interval Logging’
Time & Date : 24 Hour Real Time Clock
Flue Temperature Probe :
Construction : Pistol Grip with Stainless Steel Shaft
Hose Length : 2500mm Insertion Length : 200mm
‘K’ Type Thermocouple Accuracy : ±0.3% fsd, ±1°c
Pressure Measurement :
Selectable Ranges : mbar, kPa & inH2O
Range : -150 mbar ~ + 150mbar
Resolution : 0.01 mbar
Accuracy : ±0.5% fsd
Infrared Printer :
- Self test at Power ON
- Adjustable contrast (low, norm, high)
- Manual paper feed (advance) • Power On indication (Red LED)
- Operates on 4 “AA” batteries or optional AC adapter
| Gases : | Range | Resolution | Accuracy | |
| Oxygen | 0-25% | 0.1% | ±0.3% | |
| Carbon Monoxide | 0-10,000 ppm | 1 ppm | <20 ppm : ±3 ppm>100 ppm : ±5% | |
| Carbon Dioxide (Calculated) | 0-25% | 0.1% | ±0.3% | |
| CO/CO2 Ratio (Calculated) | 0-0.999 | -- | -- | |
| Combusion Efficiency | 0-100% | 0.1% | -- | |
| Gas Leak Sensor | 100-10,000 ppm | -- | -- | |
Network Analyzer
Measure Earth Reasistance without the need for poles I the ground or external measuring wires. Earth Measurement uses the real earth current path and the current generated by the electric network, without the need for any disconnection. The Earth Resistance displayed is exactly the earth resistance that the earth current will need to go through if an earth fault occurs. Displays voltage supply at the transformer (Line to Neutral). without loading the transformer.
Technical Specification
| Loop Impedance Range L-E, L-N | 0.03-2000V (Software Ctrl) |
| Voltage Measurement L-N, L-E | 50 to 280V AC (Sine) |
| PSC current (L-N) max. | 6KA @ 230V AC supply |
| PSC current (L-E) max. | 6KA @ 230V AC supply |
| Operating Voltage | 230V ±50% @ 50Hz Sine |
| Dimensions (LxWxD) | (170 x 165 x 92)mm |
| Power Source | 6 x AA Batteries |
Typical Accuracy
|
Loop Impedance |
4% of FS ± 2 dgt |
|
PSC Current |
10% of FS ± 5 dgt |
|
Voltage |
2% of FS ± 1 dgt |
|
Operating / Temperature |
-10°C to + 40°C / |
|
Operating Humidity |
80% max relative humidity |
Digital Automotive Engine Analyzer
Measuring Range TACH (x10rpm), DWELL (Duty Cycle)
DC Voltage : 200mV, 2V, 20V, 200V
Resistnance : 20-200-2K-20K-200K-2K ohms
Diode Check, AC Voltage 750V,
DC Current 2A, 20A with data hold,
AP 10 inductive pick-up, for Automotive Meter’s RPM measurement.
Digital Automotive Analyzer
Bi directional RS232C serial interface cable. Accurate reading of DWELL without using duty cycle to Dwell conversion chart when testing electronic fuel injection. RPM measurement for automotive engins with 1 to 12 cylender with inductive pickup or test leads. Ms-Pulse / Duty cycle measure easily. Max / Min record over 24 hrs. Backlight allows reading in dark.
Measuring Range
Voltage : 1000 V DC / 750 V AC
Curent 10 Amps DC / AC
Resistance 40MW.
Temeprature -40°C~1370°C,
Capacitance Range mF to 1000mF.