Temperature CalibratorImpact Testing Machine
Impact Testing Machine
Features
- Suitable for Charpy and Izod Impact Tests on various materials.
- Rigid designs of machine frame and other parts assure minimum energy absorption during fracture which results in improved test accuracies.
- The highly stressed and wearing parts like support blocks and striker are of special alloy steel duly heat treated. Analogue Model Conforms to IS: 3766-2003, IS: 1598-1977, IS: 1757-1999, IS: 1499-2003 & BS: 131 Part, II, III, IV.
- Digital Model Conforms to IS, BS Standards as above & also conforms to BS EN:10045-1993 (for Charpy)
- Works on pendulum principle, difference between height of drop of pendulum before rupture and height of rise after rupture of specimen is directly proportional to impact energy absorbed.
- Direct indication of impact energy absorbed by specimen on large dial for Analogue model and digital display for Digital model .
- Safety guard for operator.
| Parameters | Charpy | Izod |
| Initial potential energy (Joules) | 300 | 170 |
| Minimum scale graduation for AIT-300-N & AIT-300-EN (Joules) | 2 | 2 |
| Resolution for AIT-300-D (Joules) | 0.5 | 0.5 |
| Pendulum drop angle (Degree) | 140 | 90 |
| Impact velocity (m / sec) | 5.308 | 3.994 |
| Distance between axis of rotation and centre of strike (i.e. length of pendulum) (mm) | 813.5 | 813.5 |
| Effective weight of pendulum (kg) | 21.300 | 21.300 |
| Max. total friction and windage losses (% of initial potential energy) | 0.5% | 0.5% |
| Striking edge: | ||
| Angle at tip (Degree) | 30 | 75 |
| Radius of curvature (mm) | 2 | 0.7 |
| Width of tip (mm) | 18 | - |
| Horizontal relief (Degree) | - | 10 |
| Vertical relief (Degree) | - | 5 |
| Test Piece Supports: | ||
| Suitable for specimen (max) (mm) | 10 x 10 | 10 x 10 |
| Distance between supports (mm) | 40(+0.5, -0.0) | - |
| Taper of supports (degree) | 11 +/-1 | - |
| Radius of curvature at edge (mm) | 1 to 1.5 | - |
Overall size (mm) approx: 760(L) x 440(W) x 1925(H)
Net weight (kg) approx: Analogue Model 300, Digital Model 450
Standard Accessories
| Charpy Striker | 1 No |
| Izod Striker | 1 No |
| Combined Charpy / Izod (10 x 10 specimen) support block | 1 No |
| Specimen Setting Gauges (for Charpy and Izod) | 2 Nos |
| Set of Spanners | 1 Set |
Optional Accessories :
- Specimen setting and centering tong for charpy test
- Gauge for checking distance of specimen notch from both ends for charpy and izod test specimen (One gauge each)
- Specimen clamps for round Izod specimen.
- Gauge for checking standard ‘U’ notch on specimen
- Gauge for checking standard ‘V’ notch on specimen
- Gauge for checking depth below the standard ‘U’ notch on specimen
- Gauge for checking depth below the standard ‘V’ notch on specimen
- Template for checking cross section of 10 x 10 mm, for Izod & Charpy square test specimen
- ‘U’ notch milling cutter
- ‘V’ notch milling cutter